Job(s) 1 to 15 of 98
DateJob TitleRelevanceCompanyJob LocationSalary
2/15/2015Welders, Cutters & Welder FittersUS Tech ForceGreen Bay, WINot Provided
 ~~Welders, Cutters, and Welder Fitters     Job Purpose: Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.     Essential Duties and/or Responsibilities: Operate safety equipment and use safe work habit ...
 Related:  Production - Assemblers/Fabricators,  Skilled Trades - Mechanical,  Production - Welding and Soldering
2/11/2015Welders - 2nd shiftUS Tech ForceGreen Bay, WIBASED ON EXP.
 99 - Welders - 2nd shiftA well established Green Bay company is searching for Experience welders and welder/fabricators to work on stainless steel and high alloy pressure vessels. If you're an experienced welder who can read and interpret blueprints, pass a weld test of GTAW, GMAW, and Flux processes in the 6G position then ...
 Related:  Production - Metal/Plastic Workers,  Skilled Trades - General,  Production - Welding and Soldering
2/9/2015Robotic Welder-GREEN BAY - 1stUS Tech ForceGreen Bay, WIBased on Experience
 770 - Robotic Welder-GREEN BAY - 1st Experienced welder to work on the robot. Openings on both 1st & 2nd shift. Welding experience Some experience working with Robotic Welder preferred - will provide trainingWorking in a fabrication shop is helpful.Green BayShift: 1stWage: Based on Experience ...
 Related:  Production - General,  Production - Welding and Soldering
2/15/2015Robotic WeldersUS Tech ForceGreen Bay, WINot Provided
 ~~ Robotic Welder-GREEN BAY - 1st & 2nd Shifts are available Experienced welder to work on the robot. Openings on both 1st & 2nd shift. Welding experience Some experience working with Robotic Welder preferred - will provide training Working in a fabrication shop is helpful. Green Bay Shift: 1st & ...
 Related:  Production - Assemblers/Fabricators,  Skilled Trades - Mechanical,  Production - Welding and Soldering
2/1/2015Certified Stick WelderUS Tech ForceAppleton, WI$20 to $25 DOE
 1375 - Certified Stick WelderOur construction client has a opening for a certified stick welder, who is willing and able to travel. This position is a Temp to Perm basis for the right person!You will be working on mostly pre-engineered buildings along with some Pre-Cast buildings. Jobs range from being in Wisconsin where yo ...
 Related:  Construction/Building Trades,  Production - Metal/Plastic Workers,  Production - Welding and Soldering
2/13/2015MIG/Tig Welder - 2nd shiftUS Tech ForceGreen Bay, WI$17+ DOE
 920 - MIG/Tig Welder - 2nd shiftA local company is looking for a welders. The Candidate should have MIG &/or TIG welding on stainless steel and high allow pressure vessels.Experience with GTAW seam welders preferred.Additional experience with hand plasma cutters, torches, band saws, punches, shears, and 150 - 750 ton press ...
 Related:  General Labor/Semi-Skilled,  Production - Welding and Soldering
1/24/2015Class 2 Welder-FOX CITIESUS Tech ForceAppleton, WI$15-16 DOE
 786 - Class 2 Welder-FOX CITIESUS Tech Force has a client company located in Neenah that is looking for an EXPERIENCED Welder. This is a temp to hire, full time, first shift position. Responsibilities include but not limited to:* Working under weld department supervisor, coordinating projects with the lead welder, in partic ...
 Related:  Production - Welding and Soldering
2/26/2015WELDER I Application on Employer's WebsiteOshkosh CorporationAppleton, WINot Provided
 Recently Posted
Federal Contractor
COMPANY PROFILEThe Oshkosh Fire & Emergency segment is a single-source designer and manufacturer of fire apparatus, homeland security vehicles, mobile command, communications vehicles, and airport rescue firefighting vehicles. Our brands are known globally for quality, safety, and innovation.Oshkosh Fire & Emergency is a s ...
 Related:  Production - Assemblers/Fabricators
2/19/2015Fit-Up Welder I Application on Employer's WebsiteBroadwind Towers, Inc.Manitowoc, WINot Provided
 Federal ContractorDescription: Responsible for welding and fitting cans using fit-up work instructions, as needed for production. Essential responsibilities include but are not limited to the following: Measure circumference with flat tape Inspect bevel and land prior to fitting Ensure orientation of flange and can is ...
 Related:  Production - Welding and Soldering
2/26/2015WeldersArgus Technical ServicesGreen Bay, WINot Provided
 Recently PostedSeeking a sharp, motivated individual, with solid welding skills and additional fabrication skills.  The welding will be MIG on Mild Steel, about 1/4 inch steel, using .030 inch wire.  Both New Graduates and experienced Welders are encouraged to apply.   *A Technical Welding degree is preferred; however not ...
 Related:  Skilled Trades - General,  Skilled Trades - Mechanical
2/23/2015Clip & Clean Door Welder Application on Employer's WebsiteBroadwind Towers, Inc.Manitowoc, WINot Provided
 Recently Posted
Federal Contractor
Broadwind Towers, a division of Broadwind Energy is seeking a Clip and Clean Door Welder to join our team in Manitowoc, WI. This job requires welding with FCAW 1/16th wire in the 1G position and the 3G position. Standing and bending for long periods and the knowledge of blueprint reading. Duties also include carbon arcing ...
 Related:  Production - Welding and Soldering
2/21/2015Welder (85-863) Application on Employer's WebsiteMEGTEC Systems Inc.De Pere, WINot Provided
 Recently Posted
Federal Contractor
B&W MEGTEC is a global leader in supplying equipment for environmental compliance and sustainability. B&W MEGTEC's technical staff is devoted to identifying and delivering cost-effective solutions for total energy and environmental performance while improving bottom line results. B&W MEGTEC has a broad range ...
 Related:  Production - Welding and Soldering
2/8/2015Clip & Clean Welder I Application on Employer's WebsiteBroadwind Towers, Inc.Manitowoc, WINot Provided
 Federal ContractorDescription: Responsible for clipping out and cleaning sections using clip and clean work instructions and fabrication knowledge to ensure production needs are met. Essential responsibilities include but are not limited to the following: * Lay out clips properly * Clip out sections * Weld 2G ...
 Related:  Production - Welding and Soldering
2/26/2015WeldersArgus Technical ServicesKiel, WINot Provided
 Recently PostedSeeking experienced welders to weld various types of metals using different techniques for specific projects.  We are looking for organized, self-starters, with the ability to work unsupervised while meeting all product quality requirements.  *MIG & TIG   Requirements: *Able to read a tape measure and ...
 Related:  Skilled Trades - General,  Skilled Trades - Mechanical,  Production - Welding and Soldering
2/18/2015Experienced MIG/TIG Welder FabricatorUS Tech ForceGreen Bay, WI$14-$18 DOE
 1744 - Experienced MIG/TIG Welder FabricatorOur company is looking for experienced welders. This is a full time, temp to hire position. This position is 5 days a week 1st shift or 4 days a week 2nd shift, must have ability to work overtime.Must have the ability to work safely. Ability to work well with others, take instruct ...
 Related:  Production - Welding and Soldering

1234567Next »New Search